Supervac Hammermills
Supervac Hammermills
Alvan Blanch produces a wide range of Hammermills that can be used for industrial or farm applications: for grinding grain to fine flour or to coarse meal for animal feed production. The Hammermills can also be used for dry straw and fodder grinding. They can also be used for the grinding of non-granular materials, such as seaweed, cassava chips and maize cobs (with optional chute) .
Supervac Hammermills
- Easy to operate and maintain
- Convenient low-level feed hopper
- Robust construction Electric, diesel or petrol drive
- Suitable for most crops
- Large diameter rotor and screen
The Alvan Blanch Supervac series Hammermills are designed for milling grain in to flour, or to act as part of a larger feed preparation system. They can also be used for the grinding of non-granular materials, such as cassava chips, maize cobs, and straw (with optional chute).


Construction
The Supervac mills are of a robust construction, unlike many other competitors in the market. The main body is 3mm plate and the cyclone is a 1.6mm thick steel.
A wearing plate is bolted into the lower section of the mill body. The mill rotor, which consists of four-way reversible hinged hammers of tempered steel, is built of 6mm and 10mm plate and mounted on a 45mm diameter shaft.
A powerful fan rotor is fitted to the same shaft, and the full circle screens are available in a wide range of perforations and are easy to change. The suction feed hopper has been positioned at ground level – for ease of use.
The Hammermill incorporates a stone trap, as well as a magnet. The new highly efficient cyclone reduces dust at the discharge point and is equipped with a two-way bagging device, with quick release sack clamps as standard.
Operation
Grain is tipped into the ground level suction feed hopper, from there, it is drawn by the powerful effect of the fan. Air is controlled by a slide that can be opened and closed when needed, letting in air and therefore reducing the volume of grain sucked from the feed hopper.
The optimum feed rate from the hopper will be determined by the product processed. An ammeter is provided with the electric version, so that peak loading can be achieved.
Within the milling chamber there are hammers, rotating at high speed, to pulverise the material into particles small enough to be drawn through the screen by the fan rotor.
The milled material is conveyed pneumatically into the collection cyclone, from there, it is discharged into the two-way bagging system. The two-way bagging device greatly improves productivity and ease of operation, as it enables one bag to be filled whilst the other is being removed.

Optional Equipment
Stainless Steel construction:
To process materials like
Seaweed and others to avoid corrosion and product contamination.
Remote Feed:
Due to the powerful suction effect of the fans, the feed hopper can be positioned away from the mill (via extra pipework).
Direct Feed:
For non-granular materials (straw etc) a special direct feed chute is fitted – this incorporates a control slide for flow control when used on grain.
Dust Collection:
Filter stocking arrangement can be coupled to the cyclone outlet to collect fine dust.
Mill Mix Combination:
The cyclone can be mounted on an Alvan Blanch meal mixer for animal feed milling.
Supervac Hammermill Specifications
| Model | 212 / FP | 212/10D | 212/15E | 212/15D | 212/20E | 212/20D |
|---|---|---|---|---|---|---|
| Drive Units | Flat belt pulley | Lister TS1 diesel | 11kW electric | Lister TS1 diesel | 15kW electric | Lister TS2 diesel |
| Output (1) 5mm screen |
Depending on power | 1000 | 1500 | 1125 | 2000 | 2000 |
| Output (1) 3mm screen |
Depending on power | 750 | 1100 | 850 | 1500 | 1500 |
| Output (1) 1mm screen |
Depending on power | 250 | 375 | 300 | 500 | 500 |
| Screen Area cm2 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 |
| Model | 214/FP | 214/25E | 214/25D | 214/30E | 214/30D |
|---|---|---|---|---|---|
| Drive Units | Flat belt pulley | 18kW electric | Lister TR2 diesel | 22kW electric | Lister TR3 diesel |
| Output (1) 5mm screen |
Depending on power | 2500 | 2250 | 3000 | 3000 |
| Output (1) 3mm screen |
Depending on power | 1900 | 1725 | 2300 | 2300 |
| Output (1) 1mm screen |
Depending on power | 650 | 600 | 800 | 800 |
| Screen Area cm2 | 2000 | 2000 | 2000 | 2000 | 2000 |
1) Outputs are approximate, based on dry maize through screens of the different sizes stated. 2) Shipping – details are nominal only. 3) Dimensions – overall space occupied by 214/30D model is 2000 x 1800 x 2990mm to top of cyclone. Feed hopper is 366mm high. In accordance with our policy of continuous development, we reserve the right to change specifications and prices at any time without notice or incurring liability to purchasers. All goods supplied according to our published terms and conditions of sale (copies on application)
Subscribe to our newsletter!
Get news from Alvan Blanch activities and latest products in your inbox
- no spam !
Stay In Contact
Follow Us:
Head Office & Factory
Chelworth, Malmesbury
Wiltshire SN16 9SG
United Kingdom
info@alvanblanch.co.uk
Phone
+44 (0) 1666 577 333
Alvan Blanch Development Company Ltd
Registered in England No: 507937
VAT No: GB 137 422 481