Hammermills
Explore our photo gallery showcasing a selection of Alvan Blanch dryer installations completed worldwide.
Hammermills
Alvan Blanch produces a wide range of Hammermills that can be used for industrial or farm applications: for grinding grain to fine flour or to coarse meal for animal feed production. The Hammermills can also be used for dry straw and fodder grinding. They can also be used for the grinding of non-granular materials, such as seaweed, cassava chips and maize cobs (with optional chute) .
L-Series Hammermills:
- Robust construction for durability.
- Wide range of applications
- Simple to operate and maintain
- Power range from 30 to 90 kW
- Suitable for non-granular materials
- Pneumatic or mechanical discharge systems
- Various filtration solutions
Application:
Alvan Blanch industrial range Hammermills can be used for grinding grain into fine flour, or into coarse meal for animal feed production. The Hammermills can also be used for dry straw and fodder grinding. The industrial applications are numerous.
.
Construction:
The mills are manufactured to be robust with a thick mild steel plate. The heavy-duty rotor is fitted with large, four-way, reversible hammers in tempered steel. The rotor has a large diameter shaft running with special double roller, heavy-duty, roller bearings.
Operation:
The grain is introduced to the mill via the hopper, the material flow must be regulated and even (optional feed mechanism required, for optimal results). In the milling chamber, hammers rotate at high speeds to pulverise the material in to particles small enough to be drawn through the screen by the fan. The milled material is then conveyed pneumatically into the collection cyclone, and is then discharged in to suitable receptacle. Fine dust from the top of the cyclone will be trapped by the filters.
Optional Equipment
Metering Devices
Metering devices are required for grain grinding – to ensure that the feed is evenly spread and regulated – rotary, vibratory or screw type are available.
Automatic control of the feeder, to match the maximum available load on the motor, allows the mill to constantly run at optimum capacity.
Cyclones
A range of different sizes are available from Alvan Blanch.
Rotary Valve
May be fitted to cyclone outlet to ensure airtight connection – either to optional two-way bagging device or to a holding hopper.
Special Versions
For applications such as breaking (not grinding) the mill can be equipped with a specially designed rotor running at reduced speed and arranged for gravity discharge from the milling chamber.
Grain Milling Systems
Packaged plants incorporating hammermills with automatic feeding system and packaging of flour into weighed bags are available – Details available upon request.
L-Series Hammermill Specifications
| Model | L560x36 | L560x40 | L650×450 | L650×600 | L650×900 | L650×1200 | L650×1500 |
|---|---|---|---|---|---|---|---|
| Rotor diameter (mm) | 560 | 560 | 675 | 675 | 675 | 675 | 675 |
| Width of grinding chamber (mm) | 360 | 400 | 450 | 600 | 900 | 1200 | 1500 |
| Main shaft speed (rpm) | 2940 | 2950 | 2970 | 2970 | 2970 | 2970 | 2970 |
| Linear speed of hammer (m/s) | 86 | 86 | 105 | 105 | 105 | 105 | 105 |
| Number of hammer | 20 | 24 | 72 | 96 | 144 | 192 | 240 |
| Power (kW) | 22 / 30 | 30 / 37 | 30 / 45 | 55 / 75 | 90 / 132 | 132 / 185 | 200 / 315 |
| Capacity (t/h) | 3 - 4 | 4 - 5 | 1.5 - 2.4 | 3 - 4 | 5.2 - 7 | 7.7 - 9.8 | 11 - 16 |
| Bearing model for rotor shaft | SFK 2212 | SFK 2212 | SKF2216 | SKF2216 | SKF2317 | SKF2317 | SKF2317 |
| Grease type for rotor bearings | LGHP2 | LGHP2 | LGHP2 | LGHP2 | LGHP2 | LGHP2 | LGHP2 |
| Screen sizes (mm) | 700 x 395 | 700 x 395 | (910 x 425) x2 | (910 x 290) x4 | (910 x 290) x6 | (910 x 290) x8 | (910 x 290) x10 |
| Air flow (requirements (m3/h) | 2800 | 2800 | 3600 | 4800 | 7200 | 9600 | 12000 |
| Air pressure (Pa) | 800 - 1000 | 800 - 1000 | 1150 | 1150 | 1150 | 1150 | 1150 |
| Number of anti-vibration mounts | 4 | 4 | 6 | 6 | 6 | 8 | 8 |
| Weight (kg) | 746 | 645 | 1410 -1480 | 2070 - 2230 | 2670 - 2996 | 3350 - 3450 | 4370 - 4400 |
| Length (mm) | 1453 | 1586 | 1800 | 2170 | 2530 | 2870 | 3200 |
| Width (mm) | 749 | 770 | 1180 | 1180 | 1180 | 1180 | 1180 |
| Height (mm) | 1070 | 1420 | 1480 | 1480 | 1480 | 1480 | 1480 |
1) Outputs – are based on dry maize passing through 3mm and 1mm screens and are given for general guidance only. On barley, outputs will be approximately 25% lower
2) There are various hammer configurations for different applications. For fine grinding, the full complement of hammers should be used.
Subscribe to our newsletter!
Get news from Alvan Blanch activities and latest products in your inbox
- no spam !
Stay In Contact
Follow Us:
Head Office & Factory
Chelworth, Malmesbury
Wiltshire SN16 9SG
United Kingdom
info@alvanblanch.co.uk
Phone
+44 (0) 1666 577 333
Alvan Blanch Development Company Ltd
Registered in England No: 507937
VAT No: GB 137 422 481