Single Flow Dryer
The Single Flow dryer is a compact drying solution. Designed for high-quality output at low temperatures.
Single Flow Dryers are compact and arrive on site pre-assembled. This means the dryer can be placed immediately in to position, without the need for custom foundations. Upon the fitting of the exhaust air ducts, fuel supply pipeline and power cables, the drier is ready to go.
The dryers can be used for a variety of products and the Single Flow specialises in drying at low temperatures. These low drying temperatures mean the dryers are more fuel efficient and environmentally friendly.
The Single Flow dryers work with a large range of heat sources:
- diesel or gas burners (natural, LPG, biogas)
- biomass
- CHP (direct or indirect)
- hot water
- steam waste heat (low or high grade)
As with all our Single Flow Dryers, the variable speed bed conveyor chain gives precise control of drying duration and the required depth of bed is easily adjusted to suit the type, and condition, of the product. Again, due to low drying temperatures, the drying process is quiet and efficient.
How it Works
Single Flow Dryers' Range and Specifications
| Model | Capacity (t/hr) | Approximate Total Electrical Power (KW) | Overall Dimensions L x W x H |
|---|---|---|---|
|
SF4500 |
4.5 |
10.0 |
8m x 2m x 2.4m |
|
SF6400 |
6.0 |
14.0 |
9.5m x 2m x 2.4m |
|
SF8000 |
8.0 |
17.0 |
12m x 2m x 2.4m |
| SF12000 |
12.0 |
21.0 |
15m x 2.5m x 2.4m |
See also
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.