Mechanical Drying Almonds Serving the Industry in More Ways than One
The almond industry is changing. With an urgent need to reduce dust from conventional on-ground harvesting techniques, the harvest is now moving off-ground. This has spurred a dramatic change in all post-harvest technologies — including advances in drying technology.
As almond producers seek new ways to reduce dust, they are inadvertently also discovering new drying technologies that maintain their crops’ integrity, shelf life, and quality.
Moving Toward Off-Ground Harvests for Dust Control
Air emissions standards have come down hard on the industry, especially the dust produced during harvest time. Dust kicked up from sweepers (on-ground harvesters) has become such a significant concern that it is beginning to change conventional practices.
As detailed in 2018 at The Almond Conference, the industry's goal is to reduce dust from harvest by 50 percent by 2025. Part of the proposed solution is to move to off-ground harvesting methods — which means picking the almonds off the tree instead of sweeping them up off the ground.
But for producers, off-ground harvesting presents a dilemma: proper drying. If nuts can't be dried on the ground under the tree, what are the options? Options in consideration include in-orchard windrow drying, lot drying, and mechanical drying.
In a cost-benefit analysis, the Almond Board of California has determined that not only is mechanical drying the most effective for dust reduction, it actually improves overall profitability. Compared with conventional on-ground harvesting and drying, off-ground and mechanical drying solutions offer a potential increase in value of more than $120 per acre.
The move to reduce dust emissions seems to be improving the almond industry in many additional ways.
Going Beyond Dust, the Benefits of Advanced Drying Solutions
The Almond Board of California has invested significant energy into analyzing the economics of many new technologies for the industry, including better drying solutions. As a result, mechanical drying is turning out to be an incredible improvement over conventional practices in more ways than one.
Under the conventional approach, producers shook trees to shake loose the nuts, then left those nuts on the ground to dry. However, on-the-ground and in-hull drying could take anywhere from seven to 14 days and left the nuts open to pests and mold exposure.
According to the Almond Board, when compared with several other commercial drying techniques, mechanical drying reduced drying time from days down to a matter of hours.
The report also noted that even when almonds were dried at temperatures of up to 60°C (140°F), there were no changes to nut quality. Furthermore, commercial drying demonstrated dramatic reductions in insect infestation and damage — and only at a cost of 2 cents USD per kernel pound.
The Board noted that additional energy costs associated with mechanical drying are outweighed by the overall savings linked to off-ground harvesting. Off-ground harvesting and mechanical drying reduce product loss, as well as labor and equipment related to on-ground harvesting techniques.
Although the move toward different harvesting techniques may have initially kicked off based on stricter emissions standards, less dust is turning out to be only one of many benefits from this technological evolution.
Dust collection exhaust - Twin NDF 17655 Alvan Blanch Almond Dryers, Portugal
Research into Mechanical Drying of Almonds and Tree Nuts
Agricultural researchers have recently completed several studies investigating the best practices for drying almonds. One such study, "Drying and disinfection of off-ground harvested almonds using step-down temperature hot air heating," was published online in August 2021 in LWT: Food Science and Technology.
The authors compared drying almonds under consistent temperature settings to a step-down approach, which started high and reduced after several hours.
The Almond Dryer from Alvan Blanch, allows precision control over the temperatures and timing of the drying process. With an end drying section dedicated for cooling, the step-down temperature approach is easily applicable.
The results indicate that "step-down temperature drying improved drying efficiency vs. conventional practice," and "no significant concealed damage, color or oil quality defects [were] found after drying." Notably, the authors also measured a bacterial reduction from the step-down approach.
This 2020 study determined that drying almonds at temperatures between 40 to 60°C did not damage the quality of the final product. That means they did not record measurable differences in color, oil quality, or cavity formation following prolonged exposure to these temperatures.
Based on their findings of drying various components of the whole almond (in-hull almonds, in-shell almonds, kernels, and loose hulls), the authors suggest "dehulling the in-hull almonds and drying only the in-shell almonds."
This is all valuable intel for producers seeking ways to make almond harvesting more profitable and more efficient.
Mechanical Drying Solution for Almonds: Alvan Blanch NDF Almond Dryer
Producers take full control over the drying process thanks to the precision control panel, allowing adjustments to airspeed, drying bed depth, maximum nut temperature, dry temperature, and more. The Nut Dryer gives almond and other nut producers maximum control while drastically improving drying efficiency when compared with conventional methods used in the sector. Click here for more information about our Nut Dryers and get in touch with our team to discuss a solution for your nut crops processing.
NDF 33500 Alvan Blanch Almond Dryer, Australia