Fan / Heater Unit
Our Fan & Heater Units are designed to condition the crop on a ventilated floor.
Drying floors, or ventilated concrete drying platforms, can be used for grain harvested at low moisture.


Fan / Heater unit with heat exchanger
Designed to be high-performance, and low noise with a backward curved centrifugal fan rotor.
The fan heater units are designed to work in conjunction with a perforated platform on which the wet crop is laid - to a depth of about 30 cm (depending on crop).
The stem and leaf of any type of plant can be dried, as well as grains and roots. Very dense matter such as large roots can need a much slower drying time at a greater bed depth and a lower airflow.
The fan delivers controlled temperature for drying, this is generally around 40°C, and in most cases the crop will be dry within around 2 hours.
The fan is designed to operate continually without supervision.
Greater fuel economy can be achieved by designing the installation so that in the latter stages of drying when the exhaust air is not saturated with moisture, a proportion of the waste heat can be recycled back into the fan furnace.
Specifications
| Model | Platform area (m2) | Dry Crop per 24hrs (kg) | Wet crop per 24hrs (kg) | Fan Diameter (mm) | Drive (kW) | Fuel Consumption (LPG kg/hr) |
|---|---|---|---|---|---|---|
| B04 | 4 | 40 | 200 | 281 | 0.55 | 0.4 |
| B15 | 15 | 150 | 750 | 500 | 2.2 | 5.5 |
| B25 | 25 | 250 | 1250 | 560 | 4 | 9 |
| B40 | 40 | 400 | 2000 | 630 | 7.5 | 14.5 |
| B80 | 80 | 800 | 4000 | 900 | 15 | 29 |